Photo Gallery
Resource Person for Session on “Design Thinking” for the employees of TE Connectivity Private Limited, Dharwad on 8th of November 2024 (Afternoon Session) as a part of Training Program by Dcipher Liife Pvt. Ltd., Pune.
Resource Person for Technical Session on “Introduction to Additive Manufacturing and Its Applications” for the employees of TE Connectivity Private Limited, Dharwad on 8th of November 2024 as a part of Training Program by Dcipher Liife Pvt. Ltd., Pune.
Resource Person for Technical Talk on "Introduction to Additive Manufacturing and Its Applications" for 2nd and 3rd Year Diploma students in Mechanical Engineering on 23rd September 2024 at KPT, Mangalore.
Resource Person for One- Day In- House Hands-on Workshop on “3D Printing: from Design to Print” on 22nd July 2024 at Robotics and Automation Laboratory, YIT for 6th Sem Mechanical Engineering students of Yenepoya Institute of Technology, Moodbidri.
Invited as Resource Person for Two- Day Hands-on Workshop on “Design of Embedded Systems Using Open Source Tools” on 22nd & 23rd of January 2024 at Atal Tinkering Lab of St. Meera’s Public School, Perambra, Kozhikode.
Invited as Resource Person for a One Day Hands-on Workshop on "PCB Design Using Open Source Tools" for 2nd and 3rd Year Engineering Students of the Electronics and Communication Engineering Department on 16th of January 2024 at Shri Madhwa Vadiraja Institute of Technology & Management, Bantakal.
Resource Person for One Day Workshop on "Electronics Circuits Simulation using Tinkercad" for First Year ECE and EEE Students of Yenepoya Institute of Technology Moodbidri, Organized by First Year Engineering Students Association, YIT in association with ISTE Students Chapter(KA-109), YIT on 11th of January 2024.
Resource Person for a Technical Talk titled "3D Printing and It's Applications," conducted for BEML R&D Officials and Apprenticeship Students at BEML India, Mysuru. This session was held on the 1st of December 2023.
Resource Person for a Technical Session titled "Introduction to Robotics using Tinkercad," conducted for final- year diploma students in Automobile Engineering at SNM Polytechnic, Moodbidri. This session was held on the 7th of November 2023, as part of YenReach: Student Outreach Program hosted at Yenepoya Institute of Technology, Moodbidri.
Resource Person for a Technical Session titled "Introduction to Robotics using Tinkercad," conducted for final- year diploma students in Mechanical Engineering and Mechatronics Engineering at SNM Polytechnic, Moodbidri. This session was held on the 6th of November 2023, as part of the YenReach: Student Outreach Program hosted at Yenepoya Institute of Technology, Moodbidri.
Resource Person for Technical Talk on “3D Printing and It’s Applications” for Final Year Engineering Students in Electronics and Communication Engineering and Aeronautical Engineering on 18th of October 2023 at Shree Devi Institute of Technology, Kenjar, Mangalore.
Resource Person for One Day Hands-on Session on 13th September 2023 in ISTE Karnataka Section and VTU Sponsored State Level Five Day Faculty Development Program (FDP) On "Internet of Things (IoT): Exploring Applications and Innovations" held from 11th to 15th September 2023 at Yenepoya Institute of Technology, Moodbidri organized by Department of Electronics and Communication Engineering, YIT.
"Journey into Microcontroller Circuits: A Hands-On Introduction Session."
Attended 23rd Annual VTU Convocation Ceremony on 1st August 2023 to Receive Ph. D. Degree Certificate at VTU Belagavi.
Chief Guest for the Inauguration of K. V. G. Polytechnic, ISTE Students Chapter (KA- 168), on 31st of December 2022 at K. V. G. Polytechnic, Sullia.
Resource Person for Technical Talk on “Additive Manufacturing and It’s Applications” for Final Year Diploma students in Mechanical Engineering on 27th of December 2022 at SNS Polytechnic, Sunkadakatte, Mangalore.
Resource Person for Technical Talk on “Additive Manufacturing and It’s Applications” for Final Year Diploma students in Mechanical Engineering on 15th of December 2022 at PA Polytechnic, Mangalore.
Resource Person for Technical Talk on “3D Printing and It’s Applications” for Final Year Diploma students in Mechanical Engineering on 25th of November 2022 at BIT Polytechnic, Mangalore.
Resource Person for Technical Talk on “3D Printing and It’s Applications” for Pre- Final Year Diploma students in Mechanical Engineering on 25th of July 2022 at KPT, Mangalore.
Resource Person for Technical Talk on “Additive Manufacturing and It’s Applications” for Pre- Final Year and Final Year Engineering students in Mechanical Engineering on 9th of April 2022 at KVG College of Engineering, Sullia.
Three Day Hands-on Workshop as a Resource Person on “Simulation, Schematic Capture and PCB Design of Electronic Circuits” for Second Year Students of Electronics and Communication Engineering from 21st – 23rd of March 2022 at Yenepoya Institute of Technology, Moodbidri.
One Day Workshop as a Resource Person on “3D Printing and It’s Applications” for Final Year Diploma in Mechanical Engineering students on 14th of January 2022 at KVG Polytechnic, Sullia, D. K.
Resource Person in AICTE Sponsored Six days Short Term Training Programmme (STTP) on “Hands on approach for Design and Implementation of Digital Circuits using Open Source Computer Aided Design (CAD) tools – III” from 23rd to 28th of November 2020, Organized by Department of ECE of SRM Valliammai Engineering College, Tamilnadu.
Resource Person in AICTE Sponsored Six days Short Term Training Programmme (STTP) on “Hands on approach for Design and Implementation of Digital Circuits using Open Source Computer Aided Design (CAD) tools – II” from 2nd to 7th of November 2020, Organized by Department of ECE of SRM Valliammai Engineering College, Tamilnadu.
